Paessler SNMP Tester Antivirus Scan Results - Paessler SNMP Tester 100% Clean Program

Paessler SNMP Tester software have been tested by programsbase.com team against viruses, spyware, adware and was founded to be 100% clean.
We will recheck this software periodically to assure users that it remain clean.
Note: this award offered by programsbase.com should be used only by the author/publisher of the Paessler SNMP Tester software.

Paessler SNMP Tester 1.0 Antivirus Report

Archive:   snmptester.zip
   inflating: snmptest.exe
   inflating: readme.txt
   inflating: netsnmp-license.txt
   inflating: netsnmp.dll
   inflating: libeay32.dll
Scanning netsnmp.dll
              netsnmp.dll: OK
Scanning readme.txt
              readme.txt: OK
Scanning libeay32.dll
              libeay32.dll: OK
Scanning snmptest.exe
              snmptest.exe: OK
Scanning netsnmp-license.txt
              netsnmp-license.txt: OK
Scanning snmptester.zip
snmptester.zip: OK

----------- SCAN SUMMARY -----------
Scanned directories: 1
Scanned files: 6
Infected files: 0
Data scanned: 3.15 MB
Time: 2.032 sec (0 m 2 s)

Get The Code for Paessler SNMP Tester 1.0 Antivirus Report:

You are welcome to display a text or a graphic link on your website and link-it to this antivirus report page. Below are the codes:

Graphic link:


<a href="http://paessler-snmp-tester.download-54-25947.programsbase.com/"><img border="0" src="http://www.programsbase.com/images/cleanaward_54_25947.gif" width="129" height="80"></a>

Example:

Text link:


<a href="http://paessler-snmp-tester.antivirusreport-54-25947.programsbase.com/">Paessler SNMP Tester Antivirus report</a> from <a href="http://www.programsbase.com">programsbase.com</a>

Example: Paessler SNMP Tester Antivirus report from programsbase.com

Paessler SNMP Tester 1.0 Description:

With Paessler SNMP Tester you can run simple SNMP requests against a device in your network. During the test each single step of the SNMP request is logged into a logfile for analysis. The idea of this free program is to debug SNMP requests down to the protocol level in order to find communication and/or data problems in SNMP monitoring configurations.

Just follow these simple instructions:

1) Download Paessler SNMP Tester and run the snmptest.exe file.

2) Enter the IP address of your device and select the SNMP port and the SNMP community string.

3) Select a request type:
(a) MIB2 Interface: Reads the traffic counter of a port according to the MIB2 OID
(b) Custom OID: Enter a custom OID value to access any OID value on the device
(c) Device Uptime: Reads the standard system uptime value from the device

4) It may be necessary to select a specific local IP for the SNMP request (usually only necessary for multi homed systems)

5) Click on "Run Test" to start the testing process.

6) During the test you will find detailed information in the logfile window.

Download link: